-
CTL(D13)-250 cut-to-length robot lineEquipped with robotic arm stacking function, CTL(D13)-250 cut-to-length robot line is a special equipment for manufacturing small&medium sized transformer lamination. -
Product Description
Introduction:
Equipped with robotic arm stacking function, CTL(D13)-250 cut-to-length robot line is a special equipment for manufacturing small&medium sized transformer lamination.
Features:
Using stacking robots to replace workers to stack lamination precisely and rapidly. Continuous working and intermittent maintenance to ensure stable productivity.Closed core or without yoke core can be stacked.
Robots connect with cutting line control system and all stacking data can be transported to factory production office.
For long lamination two robots can stack same one transformer at same time. For short lamination each robot can stack 2 to 5 transformers separately up to the typeof robots.
CTL(D13)-250
Width of the sheet
35-260mm
Length of the sheet
250-1250mm
Thickness of the sheet
0.18-0.35mm
Width accuracy
±0.1mm
Length accuracy
≤0.2mm/2000mm
Angle accuracy
±0.01゜
Cutting burr
≤0.02mm
Hydraulic de-coiler
Single head
Load of de-coiler (max.)
2400kgX1
Feeding speed
0-214m/min
Tacking method
Robotic arm stacking KUKA Magnetic stacking
PLC
BECKHOFF
Servo system
BECKHOFF
AC convertor
SIEMENS
E-mail: 
Fax： 
Address：No. 88 Yongjin Road, High-end Park, Beichen District, Tianjin
