01

Swallow-Tailed Spacers Automatic Feeding and Punching Machine

Introduction:

It it mainly used for automatic feeding and punching of swallow-tailed spacers.

Features:

1. This machine adopts numerical control system, which is easy to operate. The press forming process can be complete simply by pressing the length and number of the spacers on the touch screen.

2. It equipped with a safety light curtain, the machine automatically stops when the operator enters the dangerous area.

3. It is lightweight and energy-saving, the system power does not exceed 1kw.

4. With aluminum alloy and stainless steel countertop, the press-board (raw material) can be kept clean.

Technical parameter:

1. Material/product length:5—1000mm

2. Workpiece width:20—50mm

3. Workpiece length: 5—1000mm

4. Workpiece precision: ±0.2mm

5. Workpiece thickness: 1.3—3mm

6. Fastest feeding speed:150 times/min

02

Swallow-Tailed Spacers Automatic Feeding and Milling Machine

Description:

This equipment is a special automatic processing equipment designed for spacers at both ends of the transformer insulation block. It ensures the end surface of the processed block smooth and free of micro particles.

Features:

1. It adopts high-speed motor hydraulic structure, which is easy to operate and has high automation. Simply by placing the fixed width, length and number of swallow-tailed spacers under the horizontal arm, the material would be pressed by the lateral traversing cylinder, and the special motor automatically travels for milling and slotting to complete the forming process.

2. Equipped with hydraulic compression device, which stops automatically at the limit position.

3. It is lightweight and energy-saving, the system power does not exceed 7880w.

Technical parameter:

1. Feeding width:20—50mm

2. Product length:5—1000mm

3. Product precision:±0.2mm

4. Product thickness:1.3—3mm

5. Fastest processing speed: 22000 r/min, 700-800 pieces at once.

03

Swallow-Tailed Spacers Fully-automatic Milling Machine

Description:

This equipment is a special automatic processing equipment designed for milling spacers.

Composition:

The device includes the expected clip clip feeding device, horizontal material feeding device directory (X axis), cut off device (U-axis), chamfering chamfering device I (V-axis, Z1 axis ), vertical material handling and disposal equipment directory (Y-axis), chamfer chamfering equipment II (Z2-axis), "T", base type and frame, hydraulic system, pneumatic system , dust removal system, component control system.

Technical parameter: