This machine is designed specially for milling the laminated paperboard batten into Redge or chamfering angle for the spacers in the transformer oil gap.

________________________________________

Composition:

Working table (machine body),milling cutter, active rollers for compressing material, bracket, electrical cabinet and dust collecting hood.

________________________________________

Technical parameters：

(1)    The range to process the rectangular battens:  

Thickness（3~5）mm Width（6~60）mm Length（＞500）mm              

(2)    The range to process the battens for spacers:

Thickness （1.5~3）mm Width（25~60）mm Length（＞500）mm

(3)    The size of chamfering angle:

for product thickness（1.5~3）时， R=0.7mm；0.95mm；1.45mm。

for product thickness（3~5）narrow battens，R=0.75mm; 1.0mm。

(4)  The opening design for R cutter: as per the nominal thickness of product:-0.15~-0.10mm

(5) The length of the workpiece: 500~3000mm

(6)     RPM of cutter shaft: 6000r/min

(7)     Feeding speed: 0-20m/min    

(8)   The moving distance of the vertical cutter shaft: 6 ~60mm

(9)  The milling shaft motor power : 1.5KW×2

(10)   The feeding motor power: 1.5KW

(11)    The vacuum motor power: 3KW

(12)  Overallsize1600mm×1000mm×1100mm